Case study · Commercial commission · NSW

West Tamworth Leagues Club

Three mirror-polished stainless steel spheres, 80, 100 and 120cm in diameter, for the club’s new entry water feature. Designed, fabricated and installed by ARTpark for Paynter Dixon’s design-and-construct team.

BuilderPaynter Dixon
SiteWest Tamworth, NSW
RoleSculpture design, fabrication & install
Completed2025
Mirror-polished stainless steel spheres in the entry water feature at West Tamworth Leagues Club, beside a green wall under the porte cochere
  • 316Marine-grade stainless steel, every component
  • 2 stagesBases set before waterproofing, spheres fitted after
  • In-houseDesign, fabrication, delivery and installation
  • $17MClub redevelopment by Paynter Dixon

The project

A centrepiece for a new club entry

Paynter Dixon, one of Australia’s premier design-and-construct builders, delivered a $17M redevelopment of West Tamworth Leagues Club while the club kept trading: a new façade and porte cochère, green walls, a new lobby, and a sculptural water feature at the entry.

ARTpark was engaged for that water feature’s centrepiece: mirror-polished stainless steel spheres rising out of the pool, reflecting the green walls, the lights and the people arriving.

Stainless steel sphere water feature at the new club entry, West Tamworth Leagues Club, NSW

The challenge

Fixings in before the waterproofing

The spheres’ bases had to be fixed to the pool slab before it was waterproofed and tiled, but the polished spheres couldn’t sit on a live construction site for months.

Stage 1 · during construction

Threaded bases

316 stainless base plates with threaded couplers were anchored to the slab early, so the waterproofing and tiles could be finished around them.

Stage 2 · after construction

Spheres screwed in

Once the pool was finished, each sphere and its pedestal threaded straight into its base. No drilling through new tiles or membrane, and no damage to the polished finish.

ARTpark design drawing of the 115mm threaded hex coupler and 300mm stainless steel base plate
ARTpark height detail drawing of the sphere pedestal and threaded connection
  • Spheres 80, 100 and 120cm in diameter
  • 300 × 6mm base plate, 316 stainless
  • Three 10mm concrete anchor bolts per base
  • 115mm threaded hex coupler, male and female
  • Connection 150mm above the base plate
  • 330mm pedestal, base plate to sphere
A sphere pedestal threaded into its stainless steel base plate

What ARTpark delivered

Designed, made and installed in-house

01

Design

Sphere sizes, pedestals and the two-stage threaded fixing, designed in-house.

02

Fabrication

Every component in 316 marine-grade stainless, polished to a mirror finish.

03

Delivery

Bases supplied early for the builder’s program; spheres delivered for final fit-off.

04

Installation

Both stages installed on site and coordinated with Paynter Dixon’s construction team.

Three mirror-polished stainless steel spheres on their pedestals before installation
The finished spheres on their pedestals, before installation.
Close view of two polished stainless steel spheres in the water feature reflecting the club entry
316 stainless, polished to a mirror finish.

Completed 2025

The finished entry

West Tamworth Leagues Club porte cochere entry with the stainless steel spheres water feature
West Tamworth Leagues Club entry water feature with stainless steel spheres and lit timber ceiling
Stainless steel spheres in the tiled water feature beside the green wall in daylight

Project team

Who was involved

  • Paynter DixonDesign & construct contractor
  • West Tamworth Leagues ClubClient
  • ARTpark AustraliaSpheres: design, fabrication, delivery & install
  • FytogreenGreen walls

For builders, architects & venues

Need sculpture that fits the build program?

We design, fabricate and install sculpture for clubs, hotels and commercial projects, and we work to the builder’s sequence.